Microfiber Wash Mitt

9.85€

Microfiber Car Wash Mitt 26×17 cm | 1300 g/m²

Car washing begins with safe contact with the bodywork. Hard brushes or unsuitable sponges can leave micro-scratches, so painted surfaces deserve a soft microfiber wash mitt.
The NANO GO® microfiber car wash mitt is a soft, dense 1300 g/m² washing mitt for washing car bodywork, glass, mirrors and other exterior surfaces with car shampoo.
The mitt fits comfortably around the hand, helps distribute shampoo gently and collect dirt from the surface, reducing the risk of unnecessary rubbing.
It is an essential car-washing accessory before drying with an XXL microfiber towel and applying further bodywork protection.
  • Brand: NANO GO®
  • Type: microfiber car wash mitt
  • Size: 26×17 cm
  • Density: 1300 g/m²
  • Composition: 80% polyester, 20% polyamide
  • Use: washing car bodywork, glass, mirrors and other exterior surfaces with shampoo

In stock

Pristatymas į paštomatą – tik 0,99 €

  • Done 0,99 € už visą užsakymą
  • Done „Unisend“ ir „LP EXPRESS“ paštomatai

Microfiber Car Wash Mitt 26×17 cm | 1300 g/m²

The NANO GO® microfiber car wash mitt is a soft and dense washing mitt designed for safer hand washing of car bodywork. It helps distribute car shampoo gently, lift dirt from the surface and reduce the risk of unnecessary rubbing.
The 1300 g/m² microfiber gives the mitt softness and good contact with the surface. Its mitt shape makes it comfortable to hold, easier to control pressure and convenient for reaching different parts of the car: bonnet, roof, doors, wings, bumpers, glass and mirrors.
Compared with harder brushes or unsuitable sponges, a microfiber mitt is a gentler choice for painted car surfaces. When used with a suitable car shampoo and rinsed regularly, it helps remove road dust, mud, light dirt and the dirt film formed during washing.
This mitt is intended for the washing stage. After washing, dry the car with the XXL microfiber drying towel and use a dedicated microfiber glass cloth for the final glass finish.

Key features

  • Soft microfiber mitt for hand washing a car
  • Dense 1300 g/m² microfiber for gentle surface contact
  • Comfortably fits around the hand and helps control pressure
  • Suitable for car bodywork, glass, mirrors and other exterior surfaces
  • Helps distribute shampoo and collect dirt from the surface
  • Gentler alternative to hard brushes for painted surfaces
  • Suitable for regular maintenance washing
  • Reusable and washable

How to use

For hand washing a car:
  1. Rinse the car thoroughly with water before contact washing.
  2. Prepare a bucket with water and suitable car shampoo.
  3. Soak the mitt well in shampoo solution.
  4. Wash the car from the top down using light, straight movements.
  5. Rinse the mitt frequently so dirt does not build up in the microfiber.
Recommended method:
For safer washing, use the two-bucket method: one bucket with shampoo solution and one bucket with clean rinse water. This helps reduce the amount of dirt returned to the surface.
Important:
Do not use the mitt on a dry or heavily dirty car without pre-rinsing. Do not use the same mitt for bodywork and very dirty areas such as wheels, arches or lower parts of the car.
Care: After use, rinse or wash with warm water. Wash up to 60 °C. Do not use fabric softener, bleach or chlorine. Do not iron. Air drying is recommended.
Tip: start washing from the cleanest upper areas and finish with the lower, dirtier parts. This helps reduce the risk of transferring dirt to more delicate surfaces.
Technical information: Composition: 80% polyester, 20% polyamide | Density: 1300 g/m² | Dimensions: 26×17 cm | Use: washing car bodywork, glass, mirrors and other exterior surfaces with shampoo

Best suited for

Choose this mitt if you want a soft and comfortable microfiber accessory for safer hand washing of car bodywork.
It is especially suitable for maintenance washing with car shampoo before drying and applying further protection.

Use with

More practical answers about hand washing, microfiber care and safe use can be found in the “Questions”.
Product photos may differ from the actual product color, shape or packaging appearance.

Frequently asked questions

What is this microfiber mitt for?

It is for hand washing car bodywork, glass, mirrors and other exterior surfaces with car shampoo.

Why use a mitt instead of a sponge?

A microfiber mitt gives softer contact with the surface and helps lift and collect dirt into the fibers. This can reduce unnecessary rubbing compared with unsuitable sponges or hard brushes.

Can it be used on painted surfaces?

Yes, it is intended for painted car surfaces, but the car must be pre-rinsed and the mitt must be rinsed regularly during washing.

Can the same mitt be used for wheels?

It is better not to. Use separate accessories for wheels, arches and lower dirty areas so dirt and hard particles are not transferred to the bodywork.

What is the two-bucket method?

One bucket contains shampoo solution and the other clean rinse water. The mitt is rinsed in clean water before being loaded with shampoo again, reducing dirt transfer to the surface.

Can it be used on a dry car?

No. The car should first be rinsed with water, and the mitt should be soaked in shampoo solution.

How should the mitt be washed after use?

Rinse it thoroughly after use. It can be washed up to 60 °C. Do not use fabric softener, bleach or chlorine.

Can it be dried on a radiator or in high heat?

Air drying is recommended. Avoid high heat, as it can damage microfiber performance.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…