Glass Polish with Nano Coating | SHINE PRO 2 in 1
Original price was: 15.95€.12.76€Current price is: 12.76€.
Glass polish with nano coating 500 ml
- Brand: NANO GO®
- Type: glass shining and polishing product with a hydrophobic nano coating
- Use: clean or pre-cleaned windows, mirrors, shower cabins, car glass, glazed ceramics, chrome-plated and other alcohol- and water-resistant glossy surfaces
In stock
Glass polish with nano coating 500 ml | SHINE PRO 2 in 1
SHINE PRO 2 in 1 is a ready-to-use glass shining and polishing product with a hydrophobic nano coating. It is designed as a finishing step for clean or pre-cleaned glass, mirrors, shower cabins, car glass and other alcohol- and water-resistant glossy surfaces.
What does “2 in 1” mean? In one step, the product performs two tasks: it removes light everyday marks – fingerprints, water droplet residue or cleaning streaks – while also polishing the surface and forming a thin water-repellent nano coating.
This is not a heavy-duty dirt remover. If there is limescale, grease, insect residue, construction residue or other stubborn dirt on the glass, remove it first with a suitable cleaner, then use SHINE PRO 2 in 1 as the final polishing and protection step.
Regular use helps maintain the clean appearance of glass for longer – the surface becomes slicker, water droplets run off more easily and everyday dirt adheres less to the surface.
Main features
- Removes light everyday marks and polishes the surface in one step
- Forms a light water-repellent nano coating
- Helps reduce the adhesion of water droplets, dust and everyday dirt to the surface
- Suitable for windows, mirrors, shower cabins and car glass
- Can be used on glazed ceramics, chrome-plated and other alcohol- and water-resistant glossy surfaces
- Perfect as a final step after cleaning glass, shower cabins or car glass
- Helps refresh the hydrophobic effect of already coated glass
- Ready to use – no dilution required
How to use
Before use:
- Shake before use.
- Make sure the surface is clean, dry and cool.
- If there is limescale, grease or stubborn residue on the surface, remove it first with a suitable cleaner.
For polishing and forming the nano coating:
- Apply the product with a few sprays directly onto the glass or onto a microfiber cloth.
- Use a clean microfiber cloth to spread the product evenly over the surface.
- At first, wipe the surface only lightly – do not polish it strongly immediately.
- After a few minutes, polish the surface with a completely dry microfiber cloth until it becomes clear and glossy.
- For the best result, use two microfiber cloths: one for spreading the product and the other for final polishing.
The product is effective, so spray sparingly. Using too much product does not improve the result and may require longer polishing.
Use only on surfaces that are resistant to alcohol and water. On more sensitive, painted, lacquered, specially coated or unknown surfaces, first test on a small, inconspicuous area.
Do not use on hot surfaces, screens, monitors, glasses with special coatings, untreated wood, textiles, natural leather or surfaces whose manufacturer does not recommend cleaning with alcohol-based products.
Volume: 500 ml
Where to use it and when to choose another product
Choose SHINE PRO 2 in 1 if the surface is already clean or pre-cleaned and you want to give it shine, a slicker feel and a light water-repellent nano coating.
For shower cabins and glass the product is suitable as a final step after removing limescale. It helps water droplets run off the glass more easily and makes later maintenance easier.
For car glass the product can be used as a quick polishing and light hydrophobic protection solution on clean glass.
If the glass is covered with limescale, first use Limescale Remover PRO, then use SHINE PRO 2 in 1 only after the surface is clean and dry.
If car glass is contaminated with insect or tar residue, first use insect and tar remover, then use SHINE PRO 2 in 1 for final polishing.
If long-lasting glass protection is needed, choose glass nano coating and IPA Scrubber.
Note about the result
The hydrophobic effect is most visible on a clean, dry and properly polished surface. If limescale, grease or cleaner residue remains on the glass, the nano coating may spread unevenly, so it is important to prepare the surface properly before use.
More practical answers about surfaces, streaks, polishing and the nano coating effect can be found in the “Questions” section.
Detailed technical, composition and safety information is provided in the digital product passport.
Product photos may differ from the actual color, shape or packaging appearance of the goods.
Frequently asked questions
What is the difference between SHINE PRO 2 in 1 and CRYSTAL GLASS SHINE?
CRYSTAL GLASS SHINE is designed for fast cleaning and polishing of glass, mirrors, windows and glossy surfaces without leaving a long-term nano coating. SHINE PRO 2 in 1 is designed for cleaning with an additional nano effect when you want the surface to be easier to maintain after cleaning.
What does “2 in 1” mean?
It means that one product performs two tasks: it removes light everyday marks while also polishing the surface and leaving a light hydrophobic nano coating.
Does SHINE PRO 2 in 1 remove limescale from shower glass?
No, this product is not designed for limescale removal. If there is limescale, water marks or soap residue on the glass, first use Limescale Remover PRO. Use SHINE PRO 2 in 1 only after the glass is clean and dry.
Can it be used on shower cabin glass?
Yes. The product is suitable for clean or pre-cleaned shower cabin glass. It helps form a light water-repellent coating, so water droplets run off the surface more easily.
Can it be used on mirrors?
Yes, the product is suitable for mirrors if the surface is clean, dry and resistant to alcohol-based products. Spray sparingly and polish well with a dry microfiber cloth.
Can it be used on car glass?
Yes, the product can be used on clean car glass as a polishing and light hydrophobic protection product. If the glass is contaminated with insects, grease or road dirt, first clean it with a suitable cleaner.
Can SHINE PRO 2 in 1 be used on a screen, monitor or TV?
No. SHINE PRO 2 in 1 is not recommended for screens, monitors, TVs, glasses with special coatings or other sensitive optical surfaces. For these surfaces, it is better to choose a gentler cleaning method specifically intended for screens.
What should I use for a screen or monitor?
For screens, monitors and TVs, use only a cleaner specifically intended for such surfaces, or a clean, soft microfiber cloth lightly dampened with water, if allowed by the device manufacturer. Never spray the product directly onto the screen – spray it onto the cloth and wipe carefully so that liquid does not enter the screen edges, openings or connectors.
Can CRYSTAL GLASS SHINE be used on a screen?
Yes, if the screen or device manufacturer allows the use of alcohol-based cleaners.
Why did streaks remain after use?
Streaks usually appear because too much product was used, the surface was not polished sufficiently, or the surface was not completely clean before use. Use less product, spread it in a thin layer and use a dry microfiber cloth for final polishing.
Why is the water-repellent effect not very strong?
The hydrophobic effect depends on surface preparation. If limescale, soap residue, grease or old cleaner residue remains on the glass, the coating may spread unevenly. First clean the surface thoroughly, dry it and only then use SHINE PRO 2 in 1.
Does it need to be diluted with water?
No, the product is ready to use. It does not need to be diluted or mixed with water or other products.
How much product should be sprayed?
Spray sparingly. A few sprays are usually enough. Using too much product does not improve the result and may leave streaks or require longer polishing.
What cloth should be used?
For the best result, use a 300 g/m² microfiber glass cloth. It helps achieve a clear, clean finish without streaks or lint. For glossy surfaces, you can also use the NANO GO 420 g/m² microfiber cloth.
Does the product replace a long-lasting glass nano coating?
No. SHINE PRO 2 in 1 creates a light hydrophobic effect and helps refresh the slickness of glass, but for long-lasting protection it is better to choose a dedicated glass nano coating.
Where can I find the composition and safety information?
Detailed composition, technical and safety information is provided in the digital product passport.
Product information
Physical properties
Intended use
Glass cleaner and polishing product with nano coating, designed for clean or pre-cleaned glass, mirrors, shower cabins, car windows and other glossy surfaces resistant to isopropyl alcohol and water. Suitable for polishing, finishing and forming a hydrophobic nano coating on the surface.
Usage instructions
Shake before use. Spray a small amount of the product onto the surface or onto a microfiber cloth. Spread evenly with a clean cloth – clean the surface first, but do not polish heavily immediately.
After a few minutes, polish the surface with a completely dry microfiber cloth until a clear, glossy finish is achieved.
For best results, use two microfiber cloths: one for applying the product and one for final polishing.
Do not use on hot surfaces. Do not use near open flames, sparks or other ignition sources. A compatibility test on a small, inconspicuous area is recommended before use.
Composition
Water; isopropyl alcohol; polydimethylsiloxane-based nano coating component; glycol ethers; surfactants; ammonium hydroxide.
Safety warnings
Warning!
Hazard statements (H)
H226 – Flammable liquid and vapour.<br>
H319 – Causes serious eye irritation.
Precautionary statements (P)
P101 – If medical advice is needed, have product container or label at hand.<br>
P102 – Keep out of reach of children.<br>
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.<br>
P264 – Wash thoroughly after handling.<br>
P280 – Wear protective gloves / protective clothing / eye protection / protective footwear.<br>
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.<br>
P370+P378 – In case of fire: use foam extinguisher (AB), dry chemical powder extinguisher (ABC) or carbon dioxide extinguisher (BC) to extinguish.<br>
P501 – Dispose of contents / container according to the separated collection system used in your municipality.
Packaging
Ecology and recycling
Storage conditions
Emergency contacts
Poison Control Center: +370 5 236 2052
Emergency Services: 112
Technical Consultation: +370 618 46400
Technical Questions: info@nanogo.lt
Working Hours: Mon–Fri 9:00–17:00
Manufacturer / brand owner
Unit 11 Broadgate House, Westlode Street,
Spalding, Lincs, United Kingdom, PE11 2AF
EU responsible operator / distributor in Lithuania
Tilžės g. 171-71, Šiauliai, LT-76205, Lithuania
Tel.: +370 618 46400
E-mail: info@nanogo.lt
Website: nanogo.lt
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.